2.5 tonne Takeuchi excavator plant machinery hire West Yorkshire Cleckheaton
Share
Tweet
Message
Email

Excavators

Takeuchi Excavator 3250 | 2.5 Tonne

Weight

2.5 tonnes

Enclosure

ROTS Cabin

L x W x H

1890 x 1500 x 2490mm

Weight

2.5 tonnes

Enclosure

ROTS Cabin

L x W x H

1890 x 1500 x 2490mm

The Takeuchi TB217R excavator comes with zero tailswing, decreasing the amount of overhang from the counterweight resulting in improved manoeuvrability and increased productivity. Features include:

  • Hydraulic breaker accessory available on request

  • Zero tailswing

  • Easy to operate

  • Intuitive, hydraulic pilot controls for precise operation

  • Spacious operator’s station

  • Suggested uses: Site clearance, muck shift, drainage works, civils, groundworks, landscaping

Hire Now
Data Sheet
Enclosure type Cab enclosure
Overall weight 2,440kg
Overall length 3,985mm
Overall width 1,500mm
Overall height over cab 2,490mm
Track length 1,890mm
Track width 250mm
Ground clearance 275mm
Gradeability 25° degrees
Bucket capacity (heaped) 0.064 m3
Slew speed 8.9 min-1
Slew radius 825mm
Ground pressure 29.1k Pa
Max. bucket breakout force 19.3 kN
Max. arm digging force 13.2 kN
Boom swing angle right 55° degrees
Boom swing angle left 70° degrees
Max. reach 4,235mm / 4,475mm
Max. reach at ground level 4,105mm / 4,350mm
Max. digging depth 2,290mm / 2,540mm
Max. vertical digging depth 1,800mm / 2,045mm
Max. height of cutting edge 3,815mm / 3,965mm
Max. dumping height 2,625mm / 2,775mm
Front swing radius 1,960mm / 2,005mm
Engine rated output 16.5 kW
Max. travel speed 1.6 - 2.7mph
Fuel type Diesel
Fuel tank capacity 31.2 L
We deliver and collect across West Yorkshire from Monday to Sunday.
Upon delivery, the machine(s) are inspected.
Our team can provide guidance on operating and safety procedures.
Upon collection, the machine(s) are inspected.
Delivery costs vary depending on location.

A typical hire period is for 24 hours. We collect the machinery/equipment 24 hours or later after it has been delivered to your site.

That is not possible, the charge would be for a full day’s hire.

For local deliveries, machinery and/or equipment will usually be delivered by 9am. If the machinery/equipment is required before 9am, this can be arranged, providing as much notice as possible is given due to the limited number of ‘early drop’ delivery slots.

Yes, we do weekend deliveries.

We require you to sign documentation and therefore need you to be present when delivered.

We don’t provide any thorough training for the use of our machinery. However, our operators will be happy to guide you through the safety procedures of the machinery/equipment upon delivery. As well, all machines and equipment come with an operator’s manual detailing the functions of the machine.

No, you do not need to have a driver’s licence to operate plant machinery. However, if the operator needed to drive on any public roads or motorways, they would require a driver’s licence to comply with road traffic regulations.

Within the hire industry, we understand accidents can happen. Our machinery/equipment is examined before we send it out and thoroughly inspected upon collection and we will immediately be able to notice any substantial damage.

We do not usually charge if the damage is minor, such as a scratch (entirely at our discretion).

However, you will be liable to cover the cost for more obvious damage such as dents, scratches to rams, panels or other parts, which would result in a repair bill including the price of the part and labour charges to replace the part.

It is your responsibility to have the correct insurance. Clients are advised to ensure they have ‘hired-in’ plant insurance. For a short hire period, we understand that this may not always be possible, therefore, we can provide advice on 01274 317958.

The size of the plant machinery depends on your requirements and the scope of the works, as well as any access restrictions. Our fleet contains machines of various sizes and we can advise which machine is best suited for the job by calling us on 01274 317958.

Ideally, we would prefer you to be there when the machinery/equipment is collected. However, we understand this is not always possible and therefore we ask that you could please leave the keys with somebody on site. The hirer is always responsible for the security of the machinery/equipment until we collect it, even after it is no longer in use on site.

We understand you may not have the facilities to clean the machine to look like it did when it arrived, but we ask that you please make an effort to get the worst of the muck off the machine and the inside of the machine must be mud-free when it is collected.

Enclosure type Cab
Overall weight 2,440kg
Overall length 3,985mm
Overall width 1,500mm
Overall height over cab 2,490mm
Track length 1,890mm
Track width 250mm
Ground clearance 275mm
Gradeability 25°
Bucket capacity (heaped) 0.064 m3
Slew speed 8.9 min-1
Slew radius 825mm
Ground pressure 29.1k Pa
Max. bucket breakout force 19.3 kN
Max. arm digging force 13.2 kN
Boom swing angle right 55°
Boom swing angle left 70°
Max. reach 4,235 / 4,475mm
Max. reach at ground level 4,105 / 4,350mm
Max. digging depth 2,290 / 2,540mm
Max. vertical digging depth 1,800 / 2,045mm
Max. height of cutting edge 3,815 / 3,965mm
Max. dumping height 2,625 / 2,775mm
Front swing radius 1,960 / 2,005mm
Engine rated output 16.5 kW
Max. travel speed 1.6 - 2.7mph
Fuel type Diesel
Fuel tank capacity 31.2 L
Delivery and collect across West Yorkshire.
Monday to Sunday.
Upon delivery, the machine(s) are inspected.
Operating and safety guidance provided.
Upon collection, the machine(s) are inspected.
Delivery costs vary depending on location.

A typical hire period is for 24 hours. We collect the machinery/equipment 24 hours or later after it has been delivered to your site.

That is not possible, the charge would be for a full day’s hire.

For local deliveries, machinery and/or equipment will usually be delivered by 9am. If the machinery/equipment is required before 9am, this can be arranged, providing as much notice as possible is given due to the limited number of ‘early drop’ delivery slots.

Yes, we do weekend deliveries.

We require you to sign documentation and therefore need you to be present when delivered.

We don’t provide any thorough training for the use of our machinery. However, our operators will be happy to guide you through the safety procedures of the machinery/equipment upon delivery. As well, all machines and equipment come with an operator’s manual detailing the functions of the machine.

No, you do not need to have a driver’s licence to operate plant machinery. However, if the operator needed to drive on any public roads or motorways, they would require a driver’s licence to comply with road traffic regulations.

Within the hire industry, we understand accidents can happen. Our machinery/equipment is examined before we send it out and thoroughly inspected upon collection and we will immediately be able to notice any substantial damage.

We do not usually charge if the damage is minor, such as a scratch (entirely at our discretion).

However, you will be liable to cover the cost for more obvious damage such as dents, scratches to rams, panels or other parts, which would result in a repair bill including the price of the part and labour charges to replace the part.

It is your responsibility to have the correct insurance. Clients are advised to ensure they have ‘hired-in’ plant insurance. For a short hire period, we understand that this may not always be possible, therefore, we can provide advice on 01274 317958.

The size of the plant machinery depends on your requirements and the scope of the works, as well as any access restrictions. Our fleet contains machines of various sizes and we can advise which machine is best suited for the job by calling us on 01274 317958.

Ideally, we would prefer you to be there when the machinery/equipment is collected. However, we understand this is not always possible and therefore we ask that you could please leave the keys with somebody on site. The hirer is always responsible for the security of the machinery/equipment until we collect it, even after it is no longer in use on site.

We understand you may not have the facilities to clean the machine to look like it did when it arrived, but we ask that you please make an effort to get the worst of the muck off the machine and the inside of the machine must be mud-free when it is collected.

Share
Tweet
Message
Share
Tweet
Message
Email

Other Products

6 tonne Takeuchi TB260 excavator plant hire West Yorkshire Cleckheaton

Takeuchi Excavator TB260 | 6 Tonne

Excavators

Takeuchi Excavator TB260 | 6 Tonne

1.2 tonne Develon DX10Z small mini excavator plant hire West Yorkshire Cleckheaton

Develon DX10Z-7 | 1.165 Tonne (Expanding Undercarriage)

Excavators

Develon DX10Z-7 | 1.165 Tonne (Expanding Undercarriage)

14.4 tonne Develon large excavator plant hire West Yorkshire Cleckheaton

Develon Excavator DX140LC | 14.4 Tonne

Excavators

Develon Excavator DX140LC | 14.4 Tonne