1.5 tonne JCB mini excavator plant hire West Yorkshire Cleckheaton
Share
Tweet
Message
Email

Excavators

JCB Excavator 15C | 1.5 Tonne

Weight

1.5 tonnes

Enclosure

Canopy

L x W x H

1278 x 996 x 2324mm

Weight

1.5 tonnes

Enclosure

Canopy

L x W x H

1278 x 996 x 2324mm

This JCB 15C conventional tailswing excavator has been designed and built to withstand the toughest of job sites, as well as being user-friendly, easy to operate with extra space in the operator’s station for added comfort. Features include:

  • Hydraulic breaker accessory available on request

  • Ultimate durability with hoses routed through boom, dipper and kingpost

  • Easy to operate

  • Powerful 11.7kW engine and reliable hydraulics

  • Minimal tailswing

  • Suggested uses: Site clearance, muck shift, drainage works, civils, groundworks, landscaping

Hire Now
Data Sheet
Enclosure type Cab enclosure
Operating weight 1,664kg
Undercarriage overall length 1,378mm
Overall width of superstructure 996mm
Total height over cab 2,324mm
Width over tracks 980mm
Track height 367mm
Track gauge 750mm
Track length on ground 1,030mm
Track width 230mm
Ground clearance 162mm
Tailswing radius 1,130mm
Kingpost clearance 409mm
Gross power 11.7kW @ 2,550 rpm
Max. dig reach 3,899mm
Max. dig reach on ground 3,834mm
Max. dig depth (dozer up/down) 2,271 / 2,426mm
Max. dig height 3,556mm
Max. dump/load-over height 2,598mm
Max. height to dipper nose pivot pin 3,116mm
Max. vertical wall-cut depth 1,933mm
Bucket rotation 191° degrees
Min. front swing radius (no/full offset) 1,488 / 1,171mm
Boom swing left/right 75/55° degrees
Bucket rotation 201° degrees
Bucket tearout 15.6 kN
Dipper rotation 126° degrees
Dipper tearout 8.8 kN
Slew speed 7.9rpm
Dozer length (STD) centre of boss 787mm
Dozer max. height above ground 239mm
Dozer dig depth below ground 225mm
Dozer height 234mm
Dozer width (with/without wings) 1,340 / 980mm
Max. travel speed 1.25mph
Fuel type Diesel
We deliver and collect across West Yorkshire from Monday to Sunday.
Upon delivery, the machine(s) are inspected.
Our team can provide guidance on operating and safety procedures.
Upon collection, the machine(s) are inspected.
Delivery costs vary depending on location.

A typical hire period is for 24 hours. We collect the machinery/equipment 24 hours or later after it has been delivered to your site.

That is not possible, the charge would be for a full day’s hire.

For local deliveries, machinery and/or equipment will usually be delivered by 9am. If the machinery/equipment is required before 9am, this can be arranged, providing as much notice as possible is given due to the limited number of ‘early drop’ delivery slots.

Yes, we do weekend deliveries.

We require you to sign documentation and therefore need you to be present when delivered.

We don’t provide any thorough training for the use of our machinery. However, our operators will be happy to guide you through the safety procedures of the machinery/equipment upon delivery. As well, all machines and equipment come with an operator’s manual detailing the functions of the machine.

No, you do not need to have a driver’s licence to operate plant machinery. However, if the operator needed to drive on any public roads or motorways, they would require a driver’s licence to comply with road traffic regulations.

Within the hire industry, we understand accidents can happen. Our machinery/equipment is examined before we send it out and thoroughly inspected upon collection and we will immediately be able to notice any substantial damage.

We do not usually charge if the damage is minor, such as a scratch (entirely at our discretion).

However, you will be liable to cover the cost for more obvious damage such as dents, scratches to rams, panels or other parts, which would result in a repair bill including the price of the part and labour charges to replace the part.

It is your responsibility to have the correct insurance. Clients are advised to ensure they have ‘hired-in’ plant insurance. For a short hire period, we understand that this may not always be possible, therefore, we can provide advice on 01274 317958.

The size of the plant machinery depends on your requirements and the scope of the works, as well as any access restrictions. Our fleet contains machines of various sizes and we can advise which machine is best suited for the job by calling us on 01274 317958.

Ideally, we would prefer you to be there when the machinery/equipment is collected. However, we understand this is not always possible and therefore we ask that you could please leave the keys with somebody on site. The hirer is always responsible for the security of the machinery/equipment until we collect it, even after it is no longer in use on site.

We understand you may not have the facilities to clean the machine to look like it did when it arrived, but we ask that you please make an effort to get the worst of the muck off the machine and the inside of the machine must be mud-free when it is collected.

Enclosure type Cab
Operating weight 1,664kg
Undercarriage length 1,378mm
Width of superstructure 996mm
Total height over cab 2,324mm
Width over tracks 980mm
Track height 367mm
Track gauge 750mm
Track length on ground 1,030mm
Track width 230mm
Ground clearance 162mm
Tailswing radius 1,130mm
Kingpost clearance 409mm
Max. dig reach 3,899mm
Max. dig reach on ground 3,834mm
Dig depth (dozer up) 2,271mm
Dig depth (dozer down) 2,426mm
Max. dig height 3,556mm
Max. dump height 2,598mm
Max. height to dipper nose 3,116mm
Max. vertical wall-cut depth 1,933mm
Bucket rotation 191°
Min. front swing radius 1,488 / 1,171mm
Boom swing left/right 75/55°
Bucket rotation 201°
Bucket tearout 15.6 kN
Dipper rotation 126°
Dipper tearout 8.8 kN
Slew speed 7.9rpm
Dozer height 234mm
Dozer width (w/wo wings) 1,340 / 980mm
Max. travel speed 1.25mph
Fuel type Diesel
Delivery and collect across West Yorkshire.
Monday to Sunday.
Upon delivery, the machine(s) are inspected.
Operating and safety guidance provided.
Upon collection, the machine(s) are inspected.
Delivery costs vary depending on location.

A typical hire period is for 24 hours. We collect the machinery/equipment 24 hours or later after it has been delivered to your site.

That is not possible, the charge would be for a full day’s hire.

For local deliveries, machinery and/or equipment will usually be delivered by 9am. If the machinery/equipment is required before 9am, this can be arranged, providing as much notice as possible is given due to the limited number of ‘early drop’ delivery slots.

Yes, we do weekend deliveries.

We require you to sign documentation and therefore need you to be present when delivered.

We don’t provide any thorough training for the use of our machinery. However, our operators will be happy to guide you through the safety procedures of the machinery/equipment upon delivery. As well, all machines and equipment come with an operator’s manual detailing the functions of the machine.

No, you do not need to have a driver’s licence to operate plant machinery. However, if the operator needed to drive on any public roads or motorways, they would require a driver’s licence to comply with road traffic regulations.

Within the hire industry, we understand accidents can happen. Our machinery/equipment is examined before we send it out and thoroughly inspected upon collection and we will immediately be able to notice any substantial damage.

We do not usually charge if the damage is minor, such as a scratch (entirely at our discretion).

However, you will be liable to cover the cost for more obvious damage such as dents, scratches to rams, panels or other parts, which would result in a repair bill including the price of the part and labour charges to replace the part.

It is your responsibility to have the correct insurance. Clients are advised to ensure they have ‘hired-in’ plant insurance. For a short hire period, we understand that this may not always be possible, therefore, we can provide advice on 01274 317958.

The size of the plant machinery depends on your requirements and the scope of the works, as well as any access restrictions. Our fleet contains machines of various sizes and we can advise which machine is best suited for the job by calling us on 01274 317958.

Ideally, we would prefer you to be there when the machinery/equipment is collected. However, we understand this is not always possible and therefore we ask that you could please leave the keys with somebody on site. The hirer is always responsible for the security of the machinery/equipment until we collect it, even after it is no longer in use on site.

We understand you may not have the facilities to clean the machine to look like it did when it arrived, but we ask that you please make an effort to get the worst of the muck off the machine and the inside of the machine must be mud-free when it is collected.

Share
Tweet
Message
Share
Tweet
Message
Email

Other Products

1.18 tonne Develon mini excavator plant hire West Yorkshire Cleckheaton

Develon Excavator DX10Z | 1.18 Tonne

Excavators

Develon Excavator DX10Z | 1.18 Tonne

9 tonne Volvo large excavator for work on construction sites plant hire in West Yorkshire Cleckheaton

Volvo Excavator ECR88D | 9 Tonne

Excavators

Volvo Excavator ECR88D | 9 Tonne

2.5 tonne Takeuchi excavator plant machinery hire West Yorkshire Cleckheaton

Takeuchi Excavator 3250 | 2.5 Tonne

Excavators

Takeuchi Excavator 3250 | 2.5 Tonne