6.25 tonne Doosan big large excavator for work on construction sites plant hire West Yorkshire Cleckheaton
Share
Tweet
Message
Email

Excavators

Doosan Excavator DX62R-3 | 6.25 Tonne

Weight

6.25 tonnes

Enclosure

ROTS Cabin

L x W x H

5670 x 1980 x 2130mm

Weight

6.25 tonnes

Enclosure

ROTS Cabin

L x W x H

5670 x 1980 x 2130mm

The Doosan DX62R-3 excavator is designed to move the swing centre forward, reducing tail swing length and extending the digging reach whilst maintaining the desired machine balance. As well, it is equipped with a reinforced chassis that provides strength, while the optimised boom shape ensures uniform load distribution for more durability.

  • Hydraulic breaker accessory available on request

  • High performing and reliable

  • Minimal environmental impact

  • Tracktion drive

  • Suggested uses: Site clearance, muck shift, drainage works, civils, groundworks, landscaping

Hire Now
Data Sheet
Enclosure type Cab enclosure
Overall weight 2,650kg
Transport length 5,670mm
Transport width 1,980mm
Transport height 2,550mm
Boom length 2,900mm
Arm length 1,600 / 1,900mm
Dozer height 410mm
Dozer cut below grade 440mm
Track length 2,500mm
Track width 400mm
Track height 590mm
Track gauge 1,580mm
Ground clearance 310mm
Counterweight clearance 635mm
Upper-structure width (heaped) 1,920mm
Cab width/height 1,030 / 930mm
Gradeability 30° degrees
Boom swing distance left/right 605 / 829mm
Min. swing radius 2,530mm
Bucket width 654mm
Bucket capacity 0.175m³
Min. bucket capacity 0.069m³
Max. digging reach 6,230mm
Min. digging reach 340mm
Max. digging depth 3,815mm
Max. loading height 4,045mm
Revolutions at max torque 2,100 rpm
Cylinder bore x stroke 98 x 110mm
Tear-out force 43.2 kN
Rated power at 2200 rpm 36.2 kW
Max. travel speed 1.6 - 2.9mph
Fuel type Diesel
Fuel tank capacity 78 L
We deliver and collect across West Yorkshire from Monday to Sunday.
Upon delivery, the machine(s) are inspected.
Our team can provide guidance on operating and safety procedures.
Upon collection, the machine(s) are inspected.
Delivery costs vary depending on location.

A typical hire period is for 24 hours. We collect the machinery/equipment 24 hours or later after it has been delivered to your site.

That is not possible, the charge would be for a full day’s hire.

For local deliveries, machinery and/or equipment will usually be delivered by 9am. If the machinery/equipment is required before 9am, this can be arranged, providing as much notice as possible is given due to the limited number of ‘early drop’ delivery slots.

Yes, we do weekend deliveries.

We require you to sign documentation and therefore need you to be present when delivered.

We don’t provide any thorough training for the use of our machinery. However, our operators will be happy to guide you through the safety procedures of the machinery/equipment upon delivery. As well, all machines and equipment come with an operator’s manual detailing the functions of the machine.

No, you do not need to have a driver’s licence to operate plant machinery. However, if the operator needed to drive on any public roads or motorways, they would require a driver’s licence to comply with road traffic regulations.

Within the hire industry, we understand accidents can happen. Our machinery/equipment is examined before we send it out and thoroughly inspected upon collection and we will immediately be able to notice any substantial damage.

We do not usually charge if the damage is minor, such as a scratch (entirely at our discretion).

However, you will be liable to cover the cost for more obvious damage such as dents, scratches to rams, panels or other parts, which would result in a repair bill including the price of the part and labour charges to replace the part.

It is your responsibility to have the correct insurance. Clients are advised to ensure they have ‘hired-in’ plant insurance. For a short hire period, we understand that this may not always be possible, therefore, we can provide advice on 01274 317958.

The size of the plant machinery depends on your requirements and the scope of the works, as well as any access restrictions. Our fleet contains machines of various sizes and we can advise which machine is best suited for the job by calling us on 01274 317958.

Ideally, we would prefer you to be there when the machinery/equipment is collected. However, we understand this is not always possible and therefore we ask that you could please leave the keys with somebody on site. The hirer is always responsible for the security of the machinery/equipment until we collect it, even after it is no longer in use on site.

We understand you may not have the facilities to clean the machine to look like it did when it arrived, but we ask that you please make an effort to get the worst of the muck off the machine and the inside of the machine must be mud-free when it is collected.

Enclosure type Cab
Overall weight 2,650kg
Transport length 5,670mm
Transport width 1,980mm
Transport height 2,550mm
Boom length 2,900mm
Arm length 1,600 / 1,900mm
Dozer height 410mm
Dozer cut below grade 440mm
Track length 2,500mm
Track width 400mm
Track height 590mm
Track gauge 1,580mm
Ground clearance 310mm
Counterweight clearance 635mm
Upper-structure width 1,920mm
Cab width/height 1,030 / 930mm
Gradeability 30°
Boom swing left/right 605 / 829mm
Min. swing radius 2,530mm
Bucket width 654mm
Bucket capacity 0.175m³
Min. bucket capacity 0.069m³
Max. digging reach 6,230mm
Min. digging reach 340mm
Max. digging depth 3,815mm
Max. loading height 4,045mm
Revolutions max torque 2,100 rpm
Cylinder bore x stroke 98 x 110mm
Tear-out force 43.2 kN
Rated power @2200rpm 36.2 kW
Max. travel speed 1.6 - 2.9mph
Fuel type Diesel
Fuel tank capacity 78 L
Delivery and collect across West Yorkshire.
Monday to Sunday.
Upon delivery, the machine(s) are inspected.
Operating and safety guidance provided.
Upon collection, the machine(s) are inspected.
Delivery costs vary depending on location.

A typical hire period is for 24 hours. We collect the machinery/equipment 24 hours or later after it has been delivered to your site.

That is not possible, the charge would be for a full day’s hire.

For local deliveries, machinery and/or equipment will usually be delivered by 9am. If the machinery/equipment is required before 9am, this can be arranged, providing as much notice as possible is given due to the limited number of ‘early drop’ delivery slots.

Yes, we do weekend deliveries.

We require you to sign documentation and therefore need you to be present when delivered.

We don’t provide any thorough training for the use of our machinery. However, our operators will be happy to guide you through the safety procedures of the machinery/equipment upon delivery. As well, all machines and equipment come with an operator’s manual detailing the functions of the machine.

No, you do not need to have a driver’s licence to operate plant machinery. However, if the operator needed to drive on any public roads or motorways, they would require a driver’s licence to comply with road traffic regulations.

Within the hire industry, we understand accidents can happen. Our machinery/equipment is examined before we send it out and thoroughly inspected upon collection and we will immediately be able to notice any substantial damage.

We do not usually charge if the damage is minor, such as a scratch (entirely at our discretion).

However, you will be liable to cover the cost for more obvious damage such as dents, scratches to rams, panels or other parts, which would result in a repair bill including the price of the part and labour charges to replace the part.

It is your responsibility to have the correct insurance. Clients are advised to ensure they have ‘hired-in’ plant insurance. For a short hire period, we understand that this may not always be possible, therefore, we can provide advice on 01274 317958.

The size of the plant machinery depends on your requirements and the scope of the works, as well as any access restrictions. Our fleet contains machines of various sizes and we can advise which machine is best suited for the job by calling us on 01274 317958.

Ideally, we would prefer you to be there when the machinery/equipment is collected. However, we understand this is not always possible and therefore we ask that you could please leave the keys with somebody on site. The hirer is always responsible for the security of the machinery/equipment until we collect it, even after it is no longer in use on site.

We understand you may not have the facilities to clean the machine to look like it did when it arrived, but we ask that you please make an effort to get the worst of the muck off the machine and the inside of the machine must be mud-free when it is collected.

Share
Tweet
Message
Share
Tweet
Message
Email

Other Products

6 tonne Takeuchi TB260 excavator plant hire West Yorkshire Cleckheaton

Takeuchi Excavator TB260 | 6 Tonne

Excavators

Takeuchi Excavator TB260 | 6 Tonne

1.2 tonne Develon DX10Z small mini excavator plant hire West Yorkshire Cleckheaton

Develon DX10Z-7 | 1.165 Tonne (Expanding Undercarriage)

Excavators

Develon DX10Z-7 | 1.165 Tonne (Expanding Undercarriage)

14.4 tonne Develon large excavator plant hire West Yorkshire Cleckheaton

Develon Excavator DX140LC | 14.4 Tonne

Excavators

Develon Excavator DX140LC | 14.4 Tonne